Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs

     Product Description            







                                                     <img alt="Raspberry Pi Pico" src="https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif" class="a-lazy-loaded" data-src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947900_3_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.png"><img alt="Raspberry Pi Pico" src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947900_3_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.png">       



                                                                 <img alt="3" src="https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif" class="a-spacing-base a-lazy-loaded" data-src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947901_768_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.png"><img alt="3" src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947901_768_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.png">                                                                     



                                                             <p> </p>Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz264KB of SRAM, and 2MB of on-board Flash memoryCastellated module allows soldering direct to carrier boardsUSB 1.1 Host and Device supportLow-power sleep and dormant modesComprehensive C/C++/Micropython SDK, software examples, and documentationDrag &amp; drop programming using mass storage over USB26 × multi-function GPIO pins2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channelsAccurate clock and timer on-chipTemperature sensorAccelerated floating-point libraries on-chip8 × Programmable I/O (PIO) state machines for custom peripheral support          



                                                                 <img alt="2" src="https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif" class="a-spacing-base a-lazy-loaded" data-src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947901_60_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.jpg"><img alt="2" src="https://www.beingshivam.com/wp-content/uploads/2025/01/1737947901_60_Raspberry-Pi-Pico-Flexible-Microcontroller-Board-Based-on-The-Raspberry.jpg">                                                                     




                                                                        <p class="description"> Description </p>     <p class="description"> The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. The Raspberry Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for code and data storage. </p>           <p class="description"> In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK. </p>           <p class="description"> Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow soldered SMT module. </p>          

               <br>Notice: We only provide after-sales service purchased from Seeed Studio<br>【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory.<br>【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.<br>【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support.<br>【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.<br>【Multiple Software Support】Pico comes with corresponding C/C++ SDK, Micropython SDK resources.